https://www.ebay.ca/itm/Vintage-Ohio-Sc ... rk:46:pf:0
A bit on the pricey side though. A couple of key caps seem to have been replaced.
600 rev B on eBay
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
600 rev B on eBay
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: 600 rev B on eBay
This seller, vintagecomputermuseum, is a veteran seller of vintage computer systems, and will maximize the price whenever possible. Although he claims he has no power supply, that's a bit hard to believe. If there were any way to show it working, he would do so. More likely, it's been tested and doesn't work.
However, the Rev B models are harder to come by, and this one looks to be at least in decent cosmetic condition, aside from the two missing keycaps. I agree it's on the pricey side.
However, the Rev B models are harder to come by, and this one looks to be at least in decent cosmetic condition, aside from the two missing keycaps. I agree it's on the pricey side.
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: 600 rev B on eBay
Indeed. I bought a SYM-1 of him back in 2015. He had 2 of them and one came with some weird wiring harness attached to it. That's the one I bought because he accepted my offer at a reasonable price ($225 or so). The other one, much cleaner went for $499. All that aside, the add read "When powered up with a 5V power supply the power light illuminates"
So, yeah, he could test if it he wanted to.
The one I got did not 'work' when it arrived. It had some end-user EPROM in it and the default addressing jumpers had been changed. Once I undid the changes, removed the odd wiring harness and end-user EPROM it worked fine. However, he is a little misleading with his ads.
So, yeah, he could test if it he wanted to.
The one I got did not 'work' when it arrived. It had some end-user EPROM in it and the default addressing jumpers had been changed. Once I undid the changes, removed the odd wiring harness and end-user EPROM it worked fine. However, he is a little misleading with his ads.
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: 600 rev B on eBay
The Crystal is missing, also. So , No..it would not work if it was powered up.
/Jeff
/Jeff
![Image](http://www.jeffferguson.ca/osi/signature.jpg)