Here is the "final" build: (waiting on space bar stabilizer from amazon). Soldering the keys in was not too much of a hassle,
soldered in 1 pin of each switch, then adjusted each key straight and resoldered the pin, and then the second one.
Building the KLyball 600D
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: Building the KLyball 600D
That looks fantastic!
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
Thank you
Colour add on card is next.
going to point to point solder this, and see how I make out.
Colour add on card is next.
going to point to point solder this, and see how I make out.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Building the KLyball 600D
Congrats!!!
/J
/J
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
Serial port Settings for the REV. D.
to use the 600 REV. D at 9600 what changes need to be made?
pin 11 to 11, was changed to pin 2 to pin 11. Just wondering what
modifications need to be made to run at 9600?
(It's Bluetooth time!)
Cheers.
Steve Provided the info:
the mod is the same, except no track to cut, Pin 2 of U30 to Pin 2 of U57
and that's 9600 baud.
to use the 600 REV. D at 9600 what changes need to be made?
pin 11 to 11, was changed to pin 2 to pin 11. Just wondering what
modifications need to be made to run at 9600?
(It's Bluetooth time!)
Cheers.
Steve Provided the info:
the mod is the same, except no track to cut, Pin 2 of U30 to Pin 2 of U57
and that's 9600 baud.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Posts: 233
- Joined: Tue Dec 09, 2014 12:53 am
Re: Building the KLyball 600D
Don't forget the j3 config is different the info is back in the thread
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
I will hard wire it for 9600 baud and just serial out. Yup I saw the post you were talking about with the switch. :0). Serial port testing later today.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Building the KLyball 600D
Please link the info/thread.
/J
/J
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
here is the link:
http://www.osiweb.org/osiforum/viewtopi ... 0&start=23
this same thread page 3 looks like the 23rd post. this link should take you right to it.
http://www.osiweb.org/osiforum/viewtopi ... 0&start=23
this same thread page 3 looks like the 23rd post. this link should take you right to it.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Building the KLyball 600D
Thanks, Walter.
/J
/J