J3 on revision D needs to be configured, with out the baud divider connected there is no tx/rx clock to the 6850
Building the KLyball 600D
-
- Posts: 233
- Joined: Tue Dec 09, 2014 12:53 am
Re: Building the KLyball 600D
Last edited by Klyball on Wed Jun 24, 2015 3:01 am, edited 1 time in total.
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Building the KLyball 600D
Bill, can you post the file, so there is no confusion? Thanks!BillO wrote:I got the video working. It was the character generator. I found a different file, burned it, tried it and we're all good now!
/Jeff
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
@KLyball - Thanks Grant for posting that. I finally figured it out after looking through the schematic for a while. Too long, really. Ahhh...
Is that new (600D) Superboard II doc available on-line somewhere? It would be nice to have a copy.
@Jeff. The character generator file that worked for me is attached below.
Is that new (600D) Superboard II doc available on-line somewhere? It would be nice to have a copy.
@Jeff. The character generator file that worked for me is attached below.
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 233
- Joined: Tue Dec 09, 2014 12:53 am
Re: Building the KLyball 600D
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
Thx Grant!
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
My 600D is up and running at 100%! Thanks everyone for your assistance on this!
Now, here's more good news. My memory expansion board functions 100% too on this mainboard. So that project can now continue.
BTW, what baud rates do you folks use and what do you use for end of line and character delays for text transfers?
Now, here's more good news. My memory expansion board functions 100% too on this mainboard. So that project can now continue.
BTW, what baud rates do you folks use and what do you use for end of line and character delays for text transfers?
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Building the KLyball 600D
9600 no delays
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
A question for anyone that has experience with both the 600B and the 600D.
On my 600D, the first column of video seems to start 3 columns over from where the same first column does on the 600B. Like below:
Is this normal?
On my 600D, the first column of video seems to start 3 columns over from where the same first column does on the 600B. Like below:
Code: Select all
600B:
D/C/W/M?
600D:
D/C/W/M?
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 334
- Joined: Thu Apr 16, 2015 2:27 pm
- Location: Bronx, NY USA
Re: Building the KLyball 600D
A quick question for anyone with working 600D: If the board is in 48-character mode, and you press the reset button/Break key, does it switch back to 24-character mode? I seem to remember that it does, but I'm not sure.
No current OSI hardware
Former programmer for Dwo Quong Fok Lok Sow and Orion Software Associates
Former owner of C1P MF (original version) and C2-8P DF (502-based)
Former programmer for Dwo Quong Fok Lok Sow and Orion Software Associates
Former owner of C1P MF (original version) and C2-8P DF (502-based)
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
If I recall correctly, 48 char mode will survive a reset, but not a cold start.
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card