I broke the momentary push-button switch on my C4 (installed left of the keyboard) for resetting they machine. Should the replacement be configured for momentary circuit "on" or momentary "off" ?
Thanks, Tom
C4P momentary push-button
-
- Posts: 212
- Joined: Sun Mar 08, 2015 3:42 pm
- Location: New York State
C4P momentary push-button
C8PDF w. 48K, 2x 520 24K RAM boards and Glitchworks 64K board
OSI 567 Telephony board
Spare 8" drives
Klyball D-13
OSI 567 Telephony board
Spare 8" drives
Klyball D-13
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: C4P momentary push-button
You want an SPST normally open switch. The switch will close when you push it, and pull the RESET line low by connecting it to ground.