Hi All,
Does anyone know how to wire the ACIA on the 502 board to run at 9600 baud?
I eventually want to hook up a TTL to USB device to this instead of the cassette.
/Jeff
Does anyone know how to set the 502 board ACIA to 9600?
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
-
- Posts: 356
- Joined: Wed Mar 16, 2011 1:49 am
- Location: New Zealand
Re: Does anyone know how to set the 502 board ACIA to 9600?
Jeff, see 430 board manual.
4800 R15 = 6K8 ; R16 = 2K2 ( I use 4800 as CEGMON MC load crashes at 9600 )
9600 R15 = 3K6 ; R16 + 100R
C7 = 1000pf = 1NF = .001UF =102
4800 R15 = 6K8 ; R16 = 2K2 ( I use 4800 as CEGMON MC load crashes at 9600 )
9600 R15 = 3K6 ; R16 + 100R
C7 = 1000pf = 1NF = .001UF =102
600RevB:16K,2MHz,64x32,470,CEGMON
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Does anyone know how to set the 502 board ACIA to 9600?
Thanks. I will investigate.
/Jeff
/Jeff