Boards for sale
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: Boards for sale
I have one of each PCB left. However, the 600D is the original version, which requires a couple of small mods (documented in this forum and on GitHub) in order to work. If you are interested, PM me.
-
- Posts: 2
- Joined: Sat Jan 21, 2023 1:23 pm
Re: Boards for sale
Hi Dave,
Yes, I am extremely interested.
I've been chasing boards for years, always hearing about them but always getting there too late.
The superboard was one of the first computers I had contact with circa 1978-1979. I was a radio trades apprentice then. But working on Data General mini computers and very early microprocessor based evaluation kits.
I'm sure the mods are trivial and I'm more than happy to purchase whatever I can get my hands on.
So you have a 600 and a 610 board for sale as I understand it?
I live in Adelaide, South Australia.
Given the cost of shipping, I'll take the cheapest shipping option, as shipping is often more expensive than the actual item(s).
Looking forward to your reply.
Many thanks and Cheers, Martin
Yes, I am extremely interested.
I've been chasing boards for years, always hearing about them but always getting there too late.
The superboard was one of the first computers I had contact with circa 1978-1979. I was a radio trades apprentice then. But working on Data General mini computers and very early microprocessor based evaluation kits.
I'm sure the mods are trivial and I'm more than happy to purchase whatever I can get my hands on.
So you have a 600 and a 610 board for sale as I understand it?
I live in Adelaide, South Australia.
Given the cost of shipping, I'll take the cheapest shipping option, as shipping is often more expensive than the actual item(s).
Looking forward to your reply.
Many thanks and Cheers, Martin
-
- Posts: 15
- Joined: Sun Aug 25, 2019 1:03 pm
Re: Boards for sale
I am also interested in a 600 revD, 610 and a data separator board.
If anyone is going to be doing a run of these boards, I would be in for 1 of each. Also ensure that they are the latest updates, so I don't have to worry about any mods as required on the older version of the board.
Thanks,
Andy
If anyone is going to be doing a run of these boards, I would be in for 1 of each. Also ensure that they are the latest updates, so I don't have to worry about any mods as required on the older version of the board.
Thanks,
Andy
-
- Posts: 233
- Joined: Tue Dec 09, 2014 12:53 am
Re: Boards for sale
The files on github are the revised version, only the 10 prototypes have the mods, and have been gone for years. These files were never released. I have a few seperators. And 630 boards
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 15
- Joined: Sun Aug 25, 2019 1:03 pm
Re: Boards for sale
Thanks for the reply.
Are you willing to part with one of the data separator boards? Let me know how much you are asking + shipping.
Address is in PA, USA.
Also, I am struggling to find the Github repository again. Uggg. I found it a couple of years ago, but no luck just now.
If you don't mind dropping the link here. I figured it would be easier to ask then spend hours searching..
Thanks again,
Andy
Are you willing to part with one of the data separator boards? Let me know how much you are asking + shipping.
Address is in PA, USA.
Also, I am struggling to find the Github repository again. Uggg. I found it a couple of years ago, but no luck just now.
If you don't mind dropping the link here. I figured it would be easier to ask then spend hours searching..
Thanks again,
Andy
-
- Posts: 15
- Joined: Sun Aug 25, 2019 1:03 pm
-
- Posts: 15
- Joined: Sun Aug 25, 2019 1:03 pm
Re: Boards for sale
You don't happen to have the PCB layout files for Altium that you would be willing to share? I have been thinking about capturing the schematics is KiCad and then doing the PCB as well and put it out into the open source community on OSIWeb for others. Having the PCB files as a starting point would make the PCB payout a bit easier. In theory.
Thanks
Andy
Thanks
Andy
-
- Posts: 233
- Joined: Tue Dec 09, 2014 12:53 am
Re: Boards for sale
The Boards were hand drawn so there is no work flow, the gerbers are all there is, there was a hackaday article and YouTube video just released and i have had request for boards , so i might do a limited run if there is enough interest, these are big boards.
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 15
- Joined: Sun Aug 25, 2019 1:03 pm
Re: Boards for sale
I am not seeing the Custom Data Separator D-13 board gerbers...
Have these been uploaded to github?
Also, I uploaded the gerbers to JLCPCB, and boards aren't too expensive, but the bloody shipping is like 3x the board costs..
There are fussing about not having a solder mask layer, so I may have to try PCBWAY or someother manf...
Have these been uploaded to github?
Also, I uploaded the gerbers to JLCPCB, and boards aren't too expensive, but the bloody shipping is like 3x the board costs..
There are fussing about not having a solder mask layer, so I may have to try PCBWAY or someother manf...
-
- Posts: 233
- Joined: Tue Dec 09, 2014 12:53 am
Re: Boards for sale
Shipping is going to be large no matter where you go these are big boards. There is a trick to do the mask so they don't complain. Make a top layer as 1 giant mask full copper
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598