A new document for the build and construction of the KLyBall D13 Data Separator.
Posted: Sat Feb 01, 2025 8:29 pm
I have recently built a KLyBall 600D replica machine with a 610 and D13 Data Separator and have attached a document I created related to the D13 Data Separator.
The document simply brings together information that has been passed to me and published in various parts of this forum. It was originally written as a series of notes for my own use, however, I have tidied it up a little in the hope it helps someone else.
The document includes information regarding Construction, Calibration, Gotek settings, Greaseweazle stuff and so on. It's not meant to be definitive as I am no expert, but it worked for me.
https://github.com/johnnewcombe/OSI_UK1 ... LyBall-D13
The document simply brings together information that has been passed to me and published in various parts of this forum. It was originally written as a series of notes for my own use, however, I have tidied it up a little in the hope it helps someone else.
The document includes information regarding Construction, Calibration, Gotek settings, Greaseweazle stuff and so on. It's not meant to be definitive as I am no expert, but it worked for me.
https://github.com/johnnewcombe/OSI_UK1 ... LyBall-D13